Garage Door Installation
The right kind of Garage Door Installation
Depending on the type and model of garage door that you have acquired, you must Garage Door Installation Shoreline what some people call a "pre frame", which is fixed to the wall to hold the “main frame”. You need to make a careful review on the surface of the wall where you carry out the installation.It should be rigid enough to hold the door. At this point we can classify the construction of the walls of the garages into two categories, made of brick or made of concrete.
If your garage walls are built in bricks you need to have a concrete trowel and metal rings (or Shackles) it will be necessary to secure them to the wall during the Garage Door Installation Shoreline. For this process you will need to use the chisel and hammer to mold a pretty deep hole where we will insert the rings. After having this done, insert the rings and then fill them with cement until they are fixed. Because this is an invasive work on the wall is necessary to be perfectly fixed and correctly measured.
In case that the wall of your garage is concrete will be necessary to use the drill with the wick (8 or 10 depending on the wick are going to use, select it from diameter 10 or 12), which will serve to plumb the pre frame (two vertical metal bars that being connected to a horizontal clamping function as lintel)
Note: If you are not going to install a “pre-frame” is necessary to leave a space of at least 10 millimeters. This is because the sectional main door installed in vertical frames will be overlapped inside the garage.read the installation manual, but as always, we recommend professional help as there are processes that require skills such as welding